Oct 09, 2026

What are the cost factors associated with using lsr molders?

Leave a message

As an LSR molder supplier that’s worked with medical device makers, consumer electronics brands, and automotive component manufacturers for over a decade, I’ve sat across from countless production managers who arrive at our desk with one core question: “We know silicone is high-performance, but what’s the real cost of working with an LSR molder—not just the mold, not just the resin, but every hidden and explicit factor that shows up on our P&L 6 months after launch?”

Injection molding with liquid silicone rubber (LSR) isn’t like working with thermoplastics. It’s a high-precision, low-shrinkage material that demands specialized equipment, calibrated processes, and rigorous quality checks—and those nuances come with cost drivers that don’t always show up in initial quotes. Over the years, I’ve broken these costs into three buckets: upfront capital and equipment costs, per-part operating costs, and long-term maintenance and compliance costs. Let’s walk through each, with real-world examples and lessons I’ve learned from 1,000+ projects.

First, the upfront investment: equipment and tooling, and it’s where most first-time LSR purchasers misstep. Unlike thermoplastic molding, which uses generic machines, LSR requires equipment built to handle LSR’s unique properties—viscous, two-part resin that cures at low temperatures, with zero room for contamination. You can’t just retrofit a standard thermoplastic machine; you need purpose-built LSR machinery.

Let’s start with molding machines. If you’re a small-scale production run (10,000–50,000 parts), a basic vertical LSR machine might be enough, but for mid-to-high volume (500,000+ parts) or complex geometries (like dual-component seals or overmolded LSR on plastic inserts), horizontal machines with toggle or 2K double-color technology are non-negotiable. Our TYM-W55T200 2K / Double-Color Machine is designed for exactly that—blending LSR with a base polymer (like ABS or PC) in a single cycle, which cuts down part count drastically. But here’s the cost catch: a standard horizontal LSR machine from a reputable supplier runs $80,000–$150,000, while 2K double-color LSR machines like our TYM-W55T200 jump to $180,000–$280,000. It’s a bigger upfront check, but if your product needs overmolded seals or dual-material functionality, the alternative is paying for a secondary assembly line, which adds $2–$5 per part in labor and logistics.

If you’re looking for a middle ground, our TYM-W LSR Injection Molding Machine is a reliable option for medium volumes, priced at $100,000–$170,000. It has the precision dosing and temperature control LSR requires, without the premium of 2K tech. For customers who need robust, high-volume output with minimal maintenance, our TYM-W Toggle LSR Injection Molding Machine stands out at $120,000–$190,000—its toggle system reduces energy use by 15% compared to non-toggle models, a small upfront cost that pays for itself in energy bills within 18 months.

TYM-W Toggle LSR Injection Molding MachineTYM-W LSR Injection Molding Machine

Then there’s tooling, the other big upfront cost that’s often overlooked. LSR molds aren’t steel blocks drilled with cavities; they’re precision-engineered with polished surfaces (for part release, LSR sticks to rough steel) and heated platens, with cold runner systems to prevent premature curing. A basic single-cavity LSR mold runs $15,000–$25,000, but a 16-cavity mold for high-volume medical parts? That’s $50,000–$80,000. The caveat here: tooling for LSR requires more frequent upkeep. If you skimp on polish quality, you’ll get parts with blemishes that require secondary trimming, adding 1–2 cents per part in labor. I once had a customer go with a $10,000 cheaper mold from a vendor abroad, and within 3 months, they were reworking 12% of parts—costing them $12,000 in rework fees, not to mention a missed regulatory deadline for a medical device.

Next, per-part operating costs, which are where LSR can actually be cheaper than thermoplastics if you optimize, but they’re easy to miscalculate. First, resin cost: LSR is more expensive per kilogram—usually $8–$25 vs. thermoplastics like PP at $1–$3. But LSR’s low shrinkage (often <0.1%, vs. 1–3% for thermoplastics) means less material waste. A thermoplastic part might need 10% extra resin to account for shrinkage, while an LSR part has near-zero waste, so that $15/kg LSR could end up costing $12 per usable part, vs. $2 per thermoplastic plus $1 in wasted material. For high-volume runs, that difference shrinks, but for low volumes, it’s a real line item.

Then there’s cycle time, a huge driver of per-part cost. LSR cures in 10–30 seconds per shot, while thermoplastics like PP take 20–60 seconds. Wait, that’s faster? So why is operating cost higher? Because LSR requires constant process monitoring. If temperature drifts even 2 degrees, the resin cures incorrectly, leading to scrap. That means you need dedicated operators who know LSR, not just a general molding worker. In the U.S., that’s $2–$3 more per hour than a standard molding operator. For a 10,000-part run, that’s $200–$300 in labor, vs. $50–$100 for thermoplastics. But here’s the workaround: our LSR machines have automated temperature sensors and closed-loop dosing systems that reduce operator intervention by 40%. We had a customer switch from a basic LSR machine to our TYM-W series for a 2 million-part automotive seal run, and their per-part labor dropped by 2 cents—saving them $40,000 annually.

Utilities are another underrated operating cost. LSR machines need precise temperature control (curing is 120–180°C, vs. thermoplastics’ 180–280°C) and air-dried compressed air to prevent contamination. That means higher electricity and air use, usually adding $0.01–$0.03 per part. But again, newer LSR machines like our toggle series have energy-efficient heating systems that cut this by 20–25%. One of our medical customers switched from a 10-year-old LSR machine to our TYM-W Toggle model, and their monthly utility bill dropped by $1,200—enough to cover 10% of their monthly resin cost.

Now, long-term hidden costs: compliance and maintenance, which can sink a project if you don’t plan for them. First, compliance—especially for medical devices, automotive parts, or consumer goods that touch food or skin. LSR is a biocompatible material, but only if it’s processed correctly. That means you need cleanroom facilities for molding, or at least dust-controlled workspaces. For a Class 8 cleanroom (standard for medical LSR parts), that’s $50,000–$100,000 to set up, plus $5,000–$10,000 annually for air filtration and maintenance. I’ve seen a startup skip this, only to have their product rejected by the FDA, costing them $200,000 in rework and regulatory fees.

Maintenance is another long-term cost. LSR leaves residual silicone buildup in machine nozzles and mold runners, so you need to clean the machine every 2–4 hours of operation, vs. every 8–12 hours for thermoplastic machines. That means more downtime, but with proper equipment, you can reduce this. Our LSR machines have self-cleaning nozzle systems that cut changeover and cleaning time by 30%, so downtime drops from 4 hours daily to 2.8 hours. Also, mold maintenance: LSR molds need to be polished every 6–12 months, vs. every 18–24 months for thermoplastic molds. A full mold polish runs $3,000–$5,000, so that’s an annual cost you have to budget for.

Wait, let’s talk about something even more overlooked: scrap rate. LSR’s scrap rate is usually 2–5% for experienced molders, vs. 5–10% for thermoplastics. But if you’re working with a new LSR molder, that scrap rate can jump to 10–15% because of process issues like dosing errors or temperature fluctuations. At our facility, we work to keep scrap below 3% because we’ve invested in training and monitoring, but that’s a cost that directly hits your bottom line. For a 1 million-part run, 10% scrap is 100,000 parts—if each part costs $0.50 to produce, that’s $50,000 in lost material and labor.

So what’s the real total cost? Let’s run a concrete example. Suppose you’re producing a 5-gram LSR gasket for a medical device, at 1 million parts annually.

  • Upfront: Molding machine (TYM-W series) $120,000, mold (8 cavities) $60,000 → total $180,000.
  • Operating costs: Resin $0.12 per part, labor $0.08 per part, utilities $0.02 per part → $0.22 per part, times 1 million = $220,000.
  • Annual maintenance: Machine and mold upkeep $15,000, utilities ongoing $12,000 → $27,000.
  • Compliance (Class 8 cleanroom) $8,000 annually, scrap $12,000 (3% of $400,000 total part cost) → $20,000.

Total first-year cost: $180,000 + $220,000 + $27,000 + $20,000 = $447,000, or $0.45 per part. Compare that to a thermoplastic gasket of the same size, which would have upfront mold cost $20,000, machine $80,000, operating cost $0.15 per part, annual maintenance $8,000, scrap $20,000. Total first-year cost: $100,000 + $150,000 + $8,000 + $20,000 = $278,000, or $0.28 per part. But wait—this is a case where LSR offers benefits: better biocompatibility, longer product life, lower leakage risk. So it’s not that LSR is more expensive, but that the cost drivers are different and require intentional planning.

The key takeaway here: the cost of LSR molding isn’t just a number on a quote. It’s a combination of equipment choices, process expertise, compliance needs, and long-term upkeep. If you rush into buying a basic machine and a cheap mold, you’ll pay for it in scrap, rework, and delays. If you invest in purpose-built LSR equipment (like our TYM-W lines) and work with a supplier that understands LSR’s nuances, you can mitigate most of those hidden costs.

At our LSR molder facility, we don’t just sell parts—we audit every cost factor with our clients before they sign a contract. We walk them through upfront equipment trade-offs, help them calculate operating costs based on their volume, and even connect them to trusted mold maintenance providers. If you’re curious about how LSR molding would work for your project, from small prototypes to high-volume production, we’d be glad to dive into the numbers with you. Reach out to our team to discuss your specific needs, and we’ll share a customized cost breakdown tailored to your product, volume, and timeline.

References:

  1. International Organization for Standardization (ISO) 10993-5, Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity
  2. Society of Plastics Engineers (SPE) LSR Molding Division, "Cost Optimization Strategies for Liquid Silicone Rubber Injection Molding", 2022
  3. U.S. Department of Energy, Industrial Technologies Program, "Energy Efficiency in Injection Molding Processes", 2021
Send Inquiry