Liquid Silicone Rubber (LSR) injection molding transforms two liquid components into durable solid parts through a precise chemical reaction. Initially, base polymer and catalyst are mixed in exact proportions before entering the injection unit where they're heated to optimal processing temperatures. Accurate metering prevents inconsistencies that could compromise final part integrity.
Once injected into the preheated mold cavity under controlled pressure, cross-linking begins rapidly. The mold design plays a crucial role in directing flow paths and ensuring even distribution throughout complex geometries. Venting channels must be strategically placed to release trapped air while avoiding flash formation along parting lines during closure.
Curing duration varies depending on wall thickness and mold temperature settings. Higher thermal conductivity molds accelerate this phase leading to shorter overall cycle times. After sufficient dwell period, the mold opens and ejector pins push out finished components which have already achieved their final physical properties upon leaving the tooling environment.
Post-processing steps may include trimming excess flash or performing secondary operations like pad printing or assembly. Unlike thermoplastics, cured LSR cannot be re-melted making recycling difficult yet contributing to its excellent mechanical resilience and biocompatibility traits valued across medical device and infant care product domains.












