Oct 15, 2024

What is the use method of vertical liquid silicone injection molding machine

Leave a message

The use of vertical liquid silicone injection molding machine mainly includes the following steps:

Start-up Preparation :

Check whether the power supply, cooling water, mold, etc. of the equipment are normal.
Prepare auxiliary materials such as plastic raw materials, release agents, rust inhibitors, etc.
Boot operation process:

Turn on the total power supply and the device power.
Set temperature parameters according to the material, including injection molding parameters and melt parameters.
Turn on the cooling water, install the mold, add plastic raw materials, pre-plastic test shot, and observe the plasticization of the material.
Mold clamping, mold locking, adjust the manual mode for injection molding, and adjust the injection molding parameters according to the product situation.

1 horizontal lsr injection molding machine

Switch to semi-automatic mode, set the positioning switch of the injection table, and carry out semi-automatic injection molding.
Adjustment operation process:

According to the fullness and flash size of the product, adjust the melt stroke, injection pressure, temperature and mold clamping force and other parameters.
Shutdown operation process:

After the material is injected, the barrel material is emptied and the mold is closed.
Turn off the cooling water, turn off the power to the appliance and the main power supply.
Organize the scene.
Features of the vertical liquid silicone injection molding machine include:

Double slide plate design: one upper die, two lower die, improve production efficiency.
Multi-stage precision mold temperature control: It is convenient to adjust the temperature required for each section of the product to be formed.
LSR Injection Tube Resistance and Closed Water-Cooled Nozzle: Better homogenization of LSR compound, keeping raw material properties from being destroyed.
Cooling water board and glass brazing insulation board: to ensure that the mold temperature is stable and save heat energy.
Liquid silicone feeding system: colorants can be added to make the product more distinctive.
Evacuation device: Prevent the occurrence of trapped air and bubbles in the product 2.
Basic operation method of liquid silicone gel :

Mix the silica gel and the curing agent in a ratio of 00:2 to ensure that the stirring is even.
Put the stirred silica gel into a vacuum machine to vent the bubbles, or extend the curing time to remove the bubbles.
Pour the silicone into the mold frame and wait for it to cure. After curing, the mold is demolded and the edges are burred.

Send Inquiry