The operation process of horizontal liquid silicone injection molding machine mainly includes the following steps:
Preparation :
Selection of materials: According to the comprehensive evaluation of the use, nature, and shape of the product, select the appropriate liquid silicone variety. For example, the medical industry should choose medical-grade silicone materials, and infant products generally use highly transparent food-grade liquid silicone raw materials.
Design mold: design the corresponding injection mold according to the shape and specifications of the required products. The design of the mold should take into account the fluidity of the liquid silicone, the shrinkage after solidification, the shape, size, wall thickness, surface requirements and other factors of the product, and carry out scientific and reasonable design to ensure the good performance of the product.
Preparation equipment: preparation of injection molding machines, silicone pretreatment equipment (such as vacuum tanks, heaters, etc.), mixing equipment, etc.
Silica gel pretreatment :
Compounding: The two components of liquid silicone (usually divided into A and B) are mixed according to a predetermined ratio (generally: ). The proportions are controlled by a dosing device and thoroughly mixed by a dedicated mixing device such as a static mixer to ensure an accurate ratio and homogeneous mixing.
Injection Molding :
Install the mold: Install the mold on the injection molding machine and adjust the injection position and pressure.
Feeding: The pre-treated silica gel is placed and mounted on the feeder.
Injection molding: Through the pressure of the injection molding machine, liquid silicone is fed into the mold to fill the entire mold cavity. The injection process needs to ensure that the silicone fills every detail and corner to guarantee the integrity and precision of the final product.
Styling & Vulcanization :
Heating vulcanization: After the silica gel products are formed, the vulcanization reaction needs to be carried out under heated conditions to harden the silica gel and achieve stable physical properties. Vulcanization time and temperature are key factors and need to be adjusted according to the type and thickness of the silica gel.
Cooling and demoulding: After the silica gel is completely cured, open the mold and take out the silicone products. Be careful when taking the mold to prevent damage to the mold or product.
Post-processing :
Trimming: For products with scratches, burrs and other problems, trimming.
Quality inspection: Strict quality inspection of silicone products, including appearance quality, dimensional accuracy, hardness and other indicators. Any defects or non-conformities need to be discovered and dealt with in a timely manner.
Packaging and storage: Packaging qualified silicone products with clear product information. Then store the packaged silicone products in a dry, ventilated, light-protected warehouse, away from moisture or direct sunlight.












