Features
Perfect safety protection system：
With multiple security protection. The safety door adopts interlocking device, the locking device cannot be started if it is not closed, and it will stop immediately if it is opened during operation. The operating area is equipped with a light curtain sensor, which stops when it is blocked; Emergency stop buttons are set in many parts of the machine, which can be pressed to stop all actions instantly in case of emergency; There is also a perfect fault warning and alarm system, real-time monitoring equipment status, to ensure the safety of personnel and equipment.
Process parameter storage and use:
Our vertical rubber injection molding machine supports a variety of process parameters storage and call function, according to different product types and production requirements, pre-set and save the corresponding process parameters. In the production process, only one key operation can quickly switch to the required process mode, which greatly improves the production efficiency and the stability of product quality, and reduces the waste caused by improper process adjustment.
Specifications
|
Injection Unit |
|
| Machine Model | L6068-150t |
|
Barrel Size |
160g (Can be Customized) |
|
Plunger diameter |
30mm (Customized) |
|
Injection rate |
100g/s |
|
Injection pressure |
700kg/cm2 |
|
Clamping Unit |
|
|
Clamping force |
150T |
|
Opening stroke |
400-700m |
|
Adjustable range |
-300-0mm |
|
Tie-Bars space |
600*680mm |
|
Ejection force |
4T |
|
Ejection stroke |
150mm |
|
Others |
|
|
Motor power |
12kw |
|
Voltage & current |
380V, 50HZ |
|
Pump Pressure |
20mpa |
|
Time schedule controller (TCON) |
8 sets(expandable) |
|
Machine Weight |
5.6T |
|
Machine dimension |
2.7*1.8*3.6m |
Other Products&Solution
This set of silicone seals for canisters includes a plastic container and a plastic lid with a silicone seal. These accessories are made using two machines. One is a liquid silicone rubber injection moulding machine and the other is a plastic injection moulding machine. TYM provides the LSR injection machine and mould for silicone seals for canisters.
We recommend using a vertical injection moulding machine for overmoulding products because the silicone seal needs to be added to the plastic lid.
FAQ
Q: What's your after-sales service?
A: Our vertical rubber injection molding machine is warranty for one year, we will send our engineers to your factory for installation and training free of charge, and provide offline and online after-sales service for the machine for a lifetime.
Q: How much power and capacity the air compressor needs?
A: For ordinary products, we recommend 7.5KW air compressor with the capacity of 300L.
Q: If there is a problem with the machine, how will you help us to solve it?
A: We will first help you by online communication and video call, if can't solve it done by online, we will send our engineer to your factory to solve the issue.
Hot Tags: vertical rubber injection molding machine, China vertical rubber injection molding machine manufacturers, suppliers, factory, Injection Molding, silicone injection molding, liquid silicone overmolding, liquid injection molding, vertical molding machine, used vertical injection molding machines
